Разлика между версии на „Потребител:ArkwrightVanderlinden1644“

Текуща версия към 17:28, 21 октомври 2012

Precisely what are Braces Behind Teeth And Who does Need Them?

Braces aim at correcting crooked teeth; however, a lot of people opt not to have archwires/metal wires being placed across their teeth. Because of this, braces behind teeth also known as lingual [www.braces-behind-teeth.com how to whiten teeth with braces], were developed to appeal to this concern. Braces behind teeth ensure it is tough to notice when somebody is undergoing through this type of dental care. The foundation of braces behind teeth is traced back 1970s when orthodontists in Japan and US worked separately in formulation of their very own technique of lingual braces. We've got the technology of lingual braces was first introduced in 1979 to American orthodontics offices, however, this type of braces failed to gain popularity during the initial few years, until improved technology provided better maintenance and installation of braces behind teeth.

Which kind of patient produces a good candidate for braces behind teeth? Not every individual is able to make an excellent candidate of those braces, normally, teenager's adults and adults are recommended with this treatment option. Even the size tooth maters a lot since it is highly recommended for the people patients having relatively normal sized teeth rather than small-sized teeth. The candidate should also come with an accommodating bite relationship to the lingual braces presence, as presence of deep vertical overbite (excessive overlapping of teeth) or owning an alignment which may exert heavy forces on the orthodontic brackets particularly if chewing, usually are not suitable for braces behind teeth.

What's the technology related to braces behind teeth? Based on the research, we have that lies behind this dental procedure is very complicated in that brackets and wires in combination with braces behind teeth are custom-fabricated for each and every patient utilizing a robotic wire bending and Cam, Cad technology.

Is there a PROCESS ASSOCIATED WITH GETTING BRACES BEHIND TEETH?

The procedure for placing braces behind teeth involves three major steps i.e.

Taking impression of the tooth Since the wires and brackets used allow me to share tailor made, the procedure comments through of very precise or exact impression of the patient`s teeth i.e. both upper and lower sides that are then sent, with the dentist's prescription about the desired final teeth alignment, towards the dental or orthodontic laboratory accountable for making lingual braces hardware.

Fabrication from the lingual braces hardware by the dental laboratory Here, your teeth plaster casts are manufactured out of your teeth impression received from the dentist, then the set up for your patient`s case is made from these plaster casts as per the orthodontist`s prescriptions. A setup is just a mockup of the teeth usually arranged in a precise/perfect manner. Following your completion of the setup, the next step involves scanning it in a computer to get a digitalized information that's then found in designing and creating (cam or cad technology) the customized group of archwires and orthodontic brackets necessary for the task (robotic wire bending technology). When fabrication is fully gone, embedding in the orthodontics brackets in a tray called an applicator tray is completed. Normally an applicator tray fits in the teeth so helping in holding the brackets in actual alignment through the technique used to fix them. When pretty much everything is done, the orthodontic hardware is then delivered back towards the dentist`s office.

Attaching braces behind teeth Normally, an appointment is done in which the patient returns towards the orthodontist`s office for your attachment of lingual braces which often occurs about A month as soon as the impressions were first obtained. On this step, braces behind teeth are attached by putting on cement behind every bracket and therefore the applicator tray is pressed as a way to hold these brackets in place within the teeth (and therefore all brackets found in one arch are bonded or cemented in place at the same time). The applicator tray makes sure that each bracket stays in precise alignment when its cement sets. Following the establishing from the cement, the applicator tray is broken away from the dentist hence making the brackets to be set up for the patient`s teeth. Trimming and smoothening of the excess cement is carried out. The final step involves installing of the pre-bend archwires made by the dental laboratory following securing with the brackets after which it the braces behind teeth are thought in place as well as the patient is termed as undergoing active treatment.